Cart: 0 item (s) - £0.00
ALT/VSR24-100 RY85-1-02
100Amp 24 volt split charge (VSR) relay
VSR (voltage sensing relay)
Bi-Directional, zero loss Split Charging
Fully automatic operation
Connected LED indicator
Sealed for marine/under hood installation
Ignition Protected
Very simple to install, does not require a connection to vehicle alternator
Fully epoxy sealed unit
Only 3 Connections to make
Power in, Power out & negative...that's it!
Switch on voltage 26.6vdc
Switch off voltage 25.6vdc
Dimensions:-65 x 65 x 53mm
Relay connections:- 2 x 6mm studs for power in and out. 1 x 450mm cable for negative
100Amp 24 volt split charge (VSR) relay
VSR (voltage sensing relay)
Bi-Directional, zero loss Split Charging
Fully automatic operation
Connected LED indicator
Sealed for marine/under hood installation
Ignition Protected
Very simple to install, does not require a connection to vehicle alternator
Fully epoxy sealed unit
Only 3 Connections to make
Power in, Power out & negative...that's it!
The idea of a "voltage sensitive relay" (VSR) or "voltage controlled relay" (VCR) as they are sometimes known, is to simplify the installation, no connection is made to the vehicles alternator .
Simply connect this relay to the towing vehicles positive battery terminal (via a fuse!) and link to the leisure battery
The relay monitors the towing vehicles battery voltage and when it reaches 26.6vdc, the relay switches on and supplies charging current to the aux. circuits. When the engine is stopped and the voltage of the vehicles main battery drops below 25.6vdc the unit switches off.
Only 3 connections are required to the unit and as such it can be fitted in next to no time .
Supplied with detailed full colour instructions. (No cable is supplied with the unit unless the "kit" is purchased)
Also available as a ready assembled kit with a 6 + 1 metre pre-assembled heavy duty wiring harness complete with twin fuses.
The kit is manufactured using 2 x midi fuse holders & 25mm2 / #4 AWG heavy duty extra flexible battery cable.
The kit is manufactured using 2 x midi fuse holders & 25mm2 / #4 AWG heavy duty extra flexible battery cable.
Switch on voltage 26.6vdc
Switch off voltage 25.6vdc
Dimensions:-65 x 65 x 53mm
Relay connections:- 2 x 6mm studs for power in and out. 1 x 450mm cable for negative
Related Products
£168.79
£202.55 (inc. VAT)
NEMO DDX1230 BATTERY TO BATTERY CHARGER with inbuilt solar panel controller 12V - 12V 30Amp
Inbuilt SOLAR controller Fully supports SMART Euro 5 & Euro 6 engine technology
Lithium battery compatible
Charge a 12v battery from a 12v vehicle supply at up to 30Amp
Ideal solution for charging an auxiliary battery on vehicles equipped with regenerative braking systems.
Inbuilt SOLAR controller Fully supports SMART Euro 5 & Euro 6 engine technology
Lithium battery compatible
Charge a 12v battery from a 12v vehicle supply at up to 30Amp
Ideal solution for charging an auxiliary battery on vehicles equipped with regenerative braking systems.
From:£38.95
£46.74 (inc. VAT)
100 Amp 24volt split charge relay
VOLTAGE SENSING
Very simple to install
3 Connections to make
Power in, Power out & negative...that's it!
Available as a control unit only or as a fully assembled kit
VOLTAGE SENSING
Very simple to install
3 Connections to make
Power in, Power out & negative...that's it!
Available as a control unit only or as a fully assembled kit
From:£29.95
£35.94 (inc. VAT)
ALT/VSR12-02-049-1EA-107
80 Amp 12volt split charge relay
VOLTAGE SENSING
From:£25.50
£30.60 (inc. VAT)
ALTEC 140Amp 12 volt split charge relay
VOLTAGE SENSING
Very simple to install
Also available as a fully built kit.
VOLTAGE SENSING
Very simple to install
Also available as a fully built kit.
£378.34
£454.01 (inc. VAT)
DURITE EURO 6
30Amp 24 volt - 12 volt ELECTRONIC split charge relay
VOLTAGE SENSING
Very simple to install
30Amp 24 volt - 12 volt ELECTRONIC split charge relay
VOLTAGE SENSING
Very simple to install
£14.95
£17.94 (inc. VAT)
Pre-wired twin sockets 7 pin 12N & 12S sockets.
£7.02
£8.42 (inc. VAT)
7 Pin 12N Plastic trailer pre-wired electrical socket.
£2.99
£3.59 (inc. VAT)
Towing socket (double) mounting plate
Suitable for left or right hand mounting
Suitable for left or right hand mounting
£2.61
£3.13 (inc. VAT)
Towing socket (single) mounting plate
Suitable for left or right hand mounting
Suitable for left or right hand mounting
£2.66
£3.19 (inc. VAT)
Towing socket (single) mounting plate (Retro fitting model)
No requirement to disconnect the wiring to change the mounting plate
Suitable for left or right hand mounting
No requirement to disconnect the wiring to change the mounting plate
Suitable for left or right hand mounting
From:£1.25
£1.50 (inc. VAT)
ALT/TF140-1EA-13
Rubber gasket for 7 or 13 pin electrical towing socket
Please see also ALT/TP102 Click here for ALT/TP102
£3.59
£4.31 (inc. VAT)
ALT/TP740-1-01
7 Pin 12 volt towing plug
12N
Metal bodied
Brass screw terminals
From:£5.35
£6.42 (inc. VAT)
ALT/TP750-1-01
7 Pin 12 volt towing socket 12N
£4.20
£5.04 (inc. VAT)
13 Pin Electrical towing connector Plastic bodied Brass screw terminals
£5.84
£7.01 (inc. VAT)
13 Pin 12N Electrical towing socket
Plastic bodied
Brass screw terminals
Plastic bodied
Brass screw terminals
£6.24
£7.49 (inc. VAT)
13 Pin 12N Electrical towing socket
Inbuilt fog lamp cutout
Plastic bodied
Brass screw terminals
Inbuilt fog lamp cutout
Plastic bodied
Brass screw terminals
From:£9.48
£11.38 (inc. VAT)
7 Pin 24 VOLT Electrical towing connector
24N
Metal bodied
Brass screw terminals
24N
Metal bodied
Brass screw terminals
£9.63
£11.56 (inc. VAT)
7 Pin 24 VOLT Electrical towing socket
24N
Metal bodied
Brass screw terminals
24N
Metal bodied
Brass screw terminals
£10.61
£12.73 (inc. VAT)
7 Pin 24 VOLT Electrical towing socket
24S
Metal bodied
Brass screw terminals
24S
Metal bodied
Brass screw terminals
£2.31
£2.77 (inc. VAT)
7 Pin 12N Electrical towing connector Plastic bodied Brass screw terminals
From:£2.94
£3.53 (inc. VAT)
Converts a 13 pin towing socket to accept a 7 Pin 12N Electrical towing socket
No wiring required, simply plug in and play
BULK / TRADE PACKS AVAILABLE
£3.63
£4.36 (inc. VAT)
Converts a 7 pin 12N towing socket to accept a 13 Pin 12N Electrical towing socket
No wiring required, simply plug in and play
No wiring required, simply plug in and play
£35.00
£42.00 (inc. VAT)
100Amp 24 volt split charge relay
VOLTAGE SENSING
Very simple to install
3 Connections to make
Power in, Power out & negative...that's it!
TO CLEAR LIMITED STOCK WAS £59.99 NOW £35.00
£29.12
£34.94 (inc. VAT)
Easy installation
Fully assembled wiring harness supplied
NON-Voltage sensing 12volt system
Fully assembled wiring harness supplied
NON-Voltage sensing
£1.99
£2.39 (inc. VAT)
7 Pin 12S Electrical towing connector plug
Plastic bodied
Brass screw terminals
£2.75
£3.30 (inc. VAT)
7 pin 12S towing electrical socket
£2.45
£2.94 (inc. VAT)
7 pin 12N towing electrical socket
From:£16.62
£19.94 (inc. VAT)
Easy installation
Fully assembled wiring harness supplied
NON-Voltage sensing
Fully assembled wiring harness supplied
NON-Voltage sensing
£13.35
£16.02 (inc. VAT)
Voltage Sensitive 30 Amp fridge and auxiliary battery split-charge relay for caravan/motorhome or trailer.
£5.95
£7.14 (inc. VAT)
Connects the 240 volt caravan electrical system to a household 13 amp socket, via standard caravan / site hookup mains lead.
Connect this adaptor to your existing site mains lead, and connect to your caravan.
•Enables connection of the caravan to household mains supply
•Ideal for pre-cooling fridge or charging leisure battery before setting off.
Connect this adaptor to your existing site mains lead, and connect to your caravan.
•Enables connection of the caravan to household mains supply
•Ideal for pre-cooling fridge or charging leisure battery before setting off.
From:£31.59
£37.91 (inc. VAT)
STERLING POWER PRO-SPLIT D Low Volt Drop Split Charge
Amperages from 70A - 200A
Amperages from 70A - 200A
From:£6.75
£8.10 (inc. VAT)
A range of 13 core cable
£1.95
£2.34 (inc. VAT)
A range of 7 core cables with varying inner core cable sizes, buy by the metre or by the roll.
From:£2.40
£2.88 (inc. VAT)
" ADD A CIRCUIT" MICRO fuse blade size, add a circuit fuse holders ALT/FH600
From:£2.65
£3.18 (inc. VAT)
" ADD A CIRCUIT" Micro2 fuse blade size, add a circuit fuse holders
From:£2.65
£3.18 (inc. VAT)
"ADD A CIRCUIT" Standard (ATO) fuse blade size, add a circuit fuse holders ALT/FH450-1-02
From:£2.25
£2.70 (inc. VAT)
" ADD A CIRCUIT" Mini fuse blade size, add a circuit fuse holders ALT/FH597-1-81
£58.30
£69.96 (inc. VAT)
12 - 14vdc CONTACTOR - up to 725Amp current handling (Allbright International) ALT/CONT19-5062P-07
Extremely heavy duty relay unit
Extremely heavy duty relay unit
£35.19
£42.23 (inc. VAT)
Part Number: 0-727-23
£319.17
£383.00 (inc. VAT)
Part Number: 0-852-52
£378.34
£454.01 (inc. VAT)
Part Number: 0-852-63 DISCONTINUED NOW REPLACED BY 0-852-62 30Amp model
£319.17
£383.00 (inc. VAT)
Part Number: 0-852-52
£53.56
£64.27 (inc. VAT)
Part Number: 0-727-33
From:£2.97
£3.56 (inc. VAT)
110 / 165 Amp 16mm2/ #6AWG BATTERY CABLE FITTED WITH 10mm EYELET TERMINALS
£53.95
£64.74 (inc. VAT)
24 - 28vdc CONTACTOR 12- up to 725Amp current handling (Allbright International) ALT/CONT19-5015-07
Extremely heavy duty relay unit
Extremely heavy duty relay unit
£310.30
£372.36 (inc. VAT)
Part Number: 0-852-50
£267.81
£321.37 (inc. VAT)
Part Number: 0-852-73
£367.33
£440.80 (inc. VAT)
Part Number: 0-852-72
£319.17
£383.00 (inc. VAT)
Part Number: 0-852-53
£56.24
£67.49 (inc. VAT)
Part Number: 0-727-83
From:£6.25
£7.50 (inc. VAT)
170 /255 Amp 25mm2/ #4AWG BATTERY CABLE FITTED WITH 8mm EYELET TERMINALS
£11.92
£14.30 (inc. VAT)
ALT/SND12-012A-1EA-107 Solenoid 12volt model rated at 80A continuous / 150A surge
£242.25
£290.70 (inc. VAT)
Part Number: 0-852-30
£65.04
£78.05 (inc. VAT)
Part Number: 0-727-43
£304.39
£365.27 (inc. VAT)
Part Number: 0-852-51
From:£3.87
£4.64 (inc. VAT)
BATTERY CABLE WITH BATTERY TERMINAL
£11.90
£14.28 (inc. VAT)
Part Number: 0-727-09
£5.87
£7.04 (inc. VAT)
ROUND PROFILE BRAIDED BATTERY CABLE WITH BATTERY TERMINAL
