ANDERSON SB-50 (50Amp) BLUE POWER CONNECTOR RANGE

Please note :- THESE ARE THE GENUINE AMERICAN MANUFACTURED ANDERSON CONNECTORS

NOT CHEAP COPIES THAT BREAK WHEN YOU DROP THEM ON A HARD SURFACE.

ANDERSON SB-50 (50Amp) connector housings are suitable for currents of 50Amps.

2 pole power connector ( positive and negative) for connecting and disconnecting battery/welding cables quickly and safely.

Finished in BLUE high impact ABS. (also available in GREY, RED & YELLOW)

Industry standard product

The supplied terminals can either be crimped or soldered to the cables.

 We have this SB-50 connector available in 6mm2 (#10 AWG) , 10mm2 (#8 AWG)  & 16mm2 (#6 AWG) cable sizes.

Please use the drop down menu (just above "add to cart" ) to select your required size.

(mm2 = Cross sectional area.  AWG = American Wire Guage)

Each connector block measures:

31mm wide

49mm length

(Overall length of 2 joined together = 82mm)

11mm height

Full range of Anderson cable sleeves & end caps available.

PLEASE NOTE:- Select the required bracket from the RED BOX drop down menu, located just above the "Add to cart " button.

NB. Anderson connectors are not male and female, they are genderless. Each part of a mating pair is identical, you simply rotate one connector 180 degrees and it plugs into the other. A very clever piece of engineering design.

 Only same colours will connect together i,e grey to grey, red to red etc.

Check out our CONTRALUBE " Connector protector" ideal for protecting terminals against corrosion.