BATTERY / STARTER TERMINAL RATCHET CRIMPING TOOL
ALT/TT75-01

Range of top quality EXTRA SMALL battery / starter ring /eyelet terminals.
Copper tube construction with tin plated outer
Suits cable sizes from 1.5mm2 (#18 AWG) - 4mm2 (#12 AWG).
Stud holes sizes from 4.00mm - 8.00mm
Click image to select size required

Range of top quality battery / starter ring /eyelet terminals.
Copper tube construction with tin plated outer
Suits cable sizes from
6mm2 (#10 AWG) - 50mm2 (#1 AWG).
Stud holes sizes from 5mm - 16mm
Click image to select size required

Crimping tool for UN-INSULATED auto electrical terminals. Tool gives "fold-in" type crimp (See images) The tool has a built-in cable stripper, cable cutter and a five hole bolt cutter (for bolts from M2.6 - M5).

Deutsch crimp tool for closed barrel D-Sub contacts.

Range of top quality battery / starter, ring /eyelet terminals.
Copper tube construction with tin plated outer
Our "LARGE" Range covers cable sizes from 70mm2 (#2/0 AWG) - 240mm2 (#500 AWG)
Stud holes sizes from 6mm - 16mm
Click image to select size required

PROFESSIONAL crimping tool for UN-INSULATED auto electrical terminals. Spring loaded handles Tool gives "fold-in" type crimp (see images)

Professional quality crimping tool for un-insulated crimp terminals
Suitable for cable sizes from 0.25mm2 (#24 AWG) - 1.5mm2 (#18 AWG) terminals & cable sizes
Ideally suited to our SuperSeal multi-way connector and extremely small terminals.

Professional quality ratchet crimping tool for un-insulated crimp terminals
"Stepped anvils" to allow simultaneous crimping of the insulation and conductor
Suitable for cable sizes from 0.5mm2 (#20 AWG) - 6mm2 (#10 AWG) terminals & cable sizes
Ideally suited to our SuperSeal multi-way connector terminals.

Professional quality ratchet crimping tool for un-insulated crimp terminals "Stepped anvils" to allow simultaneous crimping of the insulation and conductor Suitable for crimp terminals from 1.5mm2 -10mm2 terminals

Professional quality ratchet crimping tool for un-insulated FLAG crimp terminals "STEPPED ANVIL" type tool for simultaneous crimping of the insulation and conductor.

Range of 90 DEGREE ANGLED top quality battery / starter, ring /eyelet terminals.
Copper tube construction with tin plated outer
Click image to select size required

Professional quality ratchet crimping tool for un-insulated crimp terminals Ergonomic handle design to reduce fatique "STEPPED ANVIL" type tool for simultaneous crimping of the insulation and conductor. Suitable for un-insulated crimp terminals which accept cables from 0.05 -6.0 mm2.

Quality ratchet crimping tool for copper tube auto electrical terminals. This tool is suitable for use with copper tube type terminals from 0.3mm2- 16mm2
An alternative to our ALT/TN72-09 where space is limited.

Professional quality crimping tool for copper tube auto electrical terminals. This tool is suitable for eyelet terminals from 10mm2- 95mm2

Quality ratchet crimping tool for copper tube auto electrical terminals. This tool is suitable for use with eyelet terminals from 2mm2- 25mm2
A perfect crimp is assured as the ratchet will not release until the crimp is perfectl...

Professional "Indentation" crimping tool for terminals from 6mm2 - 120mm2 (#10 - #1 AWG)

Professional "HEX" crimping tool for terminals from 6mm2 - 50mm2 (#10 - #1 AWG)

Professional "HEX" crimping tool for terminals from 25mm2 - 150mm2 (#4 - #300 AWG)

Professional "HEX" crimping tool for terminals from 6mm2 - 120mm2 (#16 - #0000 AWG)

Crimping pliers suitable for crimping PRE-INSULATED RED, BLUE & YELLOW insulated automotive terminals.

Part Number: 0-704-05

Part Number: 0-704-10

Part Number: 0-704-50

Pair of PROFESSIONAL ratchet crimping pliers for pre-insulated RED, BLUE & YELLOW terminals

PROFESSIONAL ratchet crimping pliers for pre-insulated RED, BLUE & YELLOW terminals

ALT/TT304-1-01

Pair of crimping pliers suitable for insulated automotive terminals.

Part Number: 0-004-50

Pair of ratchet crimping pliers for pre-insulated "FLAG" type terminals

Part Number: 0-702-10

Pair of PROFESSIONAL ratchet crimping pliers for pre-insulated HEATSHRINK RED, BLUE & YELLOW terminals

Pair of PROFESSIONAL ratchet crimping pliers for pre-insulated RED, BLUE & YELLOW terminals

Part Number: 0-702-00

Part Number: 0-703-00

Part Number: 0-703-20

Part Number: 0-703-99

Part Number: 0-704-55

Part Number: 0-706-98

NOW DISCONTINUED 

Part Number: 0-703-85

Part Number: 0-703-90

Professional quality 552 assorted wiring terminals and an ergonomically designed professional crimp tool.

Part Number: 0-703-51

Part Number: 0-703-54

Part Number: 0-703-52

Part Number: 0-703-53

Part Number: 0-703-60

Part Number: 0-702-50

Part Number: 0-703-50

Part Number: 0-704-20

Part Number: 0-704-21

Part Number: 0-004-00

Part Number: 0-706-99 NOW DISCONTINUED

175 assorted wiring terminals and a crimping tool

Ideal for the DIY'er