BENE 4I4 Reversing / Parking Sensor Kit

with Dash Top Display Unit 

ALT/BENE414-LED-1-10

Available in single kits or bulk packs of 5 kits & 10 kits

Rear parking assistant BENE 414 with 4 sensors 20mm and Dash Top Display Unit. The system is activated by reverse gear and indicated acoustic signal & and the Visual Display Unit which inform the driver about the actual distance from an obstacle.

4 flush fitting sensor heads

Also available without the display as ALT/BENE404-1-10  

Sensors can be painted to match bumper colour


Complete kit:- comes complete with pilot drill and hole saw unit to make easy work of installing the sensor heads

Can be fitted to the front of the vehicle using our ALT/CANM8PARKONE control unit

• The sensors emit short pulses of ultrasound waves, which then rebound from obstacles within their field of view. The rebounded signals are then received again by the sensors. The central control units then evaluates the time delay of the rebounded signals and interprets the distance of an obstacle.
• 4 x  ultrasonic sensors are installed into the rear bumper.
• Once reverse gear is selected the main control unit provides distance information via a small speaker which is mounted inside the vehicle.
• Initial tones confirm the selection of reverse gear, as the vehicle reverses nearer to an obstacle the tones become more frequent and remain constant at approximately 30cm from an obstacle. The dash top mounted display unit alos shows the proximity to objects.

• Internal speaker
• Optional LED display 4 sensor system available   ALT/BENE414-1-10
• External sensors can be colour coded if required, without affecting the performance of the system

Dimensions
Sensors:17.6mm in depth (allow an extra 5mm for cable clearance) 

Bleeper/Sounder Unit: 43mm in diameter (plus 9mm either side for the mounting brackets)

Control Unit :- 71mm (W) 61mm (D) 27mm (H)

Dash Display Unit: 96mm (W) 42mm (D) 19mm (H)