Chrome plated triple switch panel with an aircraft style switch, starter switch, toggle switch and two 12v warning lights.
This panel is ideal for use on kit cars/racing vehicles, where a quick disconnection of the ignition is required.
Switch 1 = (ideal for ignition circuits) aircraft style toggle switch, with spring loaded RED hood. To operate, lift the cover, flick switch upwards. To turn off, simply touch the red hood, the spring loaded hood acts on the switch to switch off the circuit quickly.
Switch 2 = high current momentary action, intended for use on starter solenoids.
Rubber covered actuator.
Warning light 1= 12 volt red warning light,
Warning light 2 = 12volt green warning light
Connections are by 1/4\" spade terminals (screw terminals on the starter switch).
Dimensions: 135mm (l) x 65mm (w) x 40mm (depth required behind panel) Switch protrusion 32mm (hood inactive)
Switch protrusion 45mm (hood active) Four fixing holes are provided in the switch panel for fixing.