Cart: 0 item (s) - £0.00
|
General purpose soldering iron
60Watt output, ideal for automotive / general electrical use
1.2mtr mains lead
240v Mains powered
Supplied with a 0.6mm pointed soldering tip
Replacement tips available
C.E. approved
Related Products
£4.62
£5.54 (inc. VAT)
Crimping tool for UN-INSULATED auto electrical terminals. Tool gives "fold-in" type crimp (See images) The tool has a built-in cable stripper, cable cutter and a five hole bolt cutter (for bolts from M2.6 - M5).
£8.99
£10.79 (inc. VAT)
Multi-functional test meter complete with leads and probes. An essential piece of kit for the professional or serious enthusiast.
£6.75
£8.10 (inc. VAT)
240v powered soldering iron 60W heat output
From:£9.12
£10.94 (inc. VAT)
PROFESSIONAL crimping tool for UN-INSULATED auto electrical terminals. Spring loaded handles Tool gives "fold-in" type crimp (see images)
£36.95
£44.34 (inc. VAT)
ALT/SOL8-1-02
In our opinion the finest gas soldering iron on the market.
Full range of interchangable tips are available for a range of uses, hot air blast, plastic cutting etc etc.
The SuperPro comes with Piezo ignition for convenience.
Switch on / ig...
£21.53
£25.84 (inc. VAT)
Flux cored solder
16 SWG / 1.6mm / 0.064"
40/60 (Sn/Pb)
500g reel
16 SWG / 1.6mm / 0.064"
40/60 (Sn/Pb)
500g reel
£21.47
£25.76 (inc. VAT)
Flux cored solder
10 SWG / 3.2mm / 0.125"
40/60 (Sn/Pb)
500g reel
10 SWG / 3.2mm / 0.125"
40/60 (Sn/Pb)
500g reel
£3.55
£4.26 (inc. VAT)
ANTEX lead free solder
99.25% Tin
4 metres of solder in dispenser
99.25% Tin
4 metres of solder in dispenser
From:£29.01
£34.81 (inc. VAT)
Professional quality ratchet crimping tool for un-insulated crimp terminals
"Stepped anvils" to allow simultaneous crimping of the insulation and conductor
Suitable for cable sizes from 0.5mm2 (#20 AWG) - 6mm2 (#10 AWG) terminals & cable sizes
Ideally suited to our SuperSeal multi-way connector terminals.
"Stepped anvils" to allow simultaneous crimping of the insulation and conductor
Suitable for cable sizes from 0.5mm2 (#20 AWG) - 6mm2 (#10 AWG) terminals & cable sizes
Ideally suited to our SuperSeal multi-way connector terminals.
£22.38
£26.86 (inc. VAT)
Professional quality ratchet crimping tool for un-insulated crimp terminals "Stepped anvils" to allow simultaneous crimping of the insulation and conductor Suitable for crimp terminals from 1.5mm2 -10mm2 terminals
Professional quality ratchet STEPPED ANVIL crimp tool for uninsulated crimp terminals ALT/TN73A-1-09
£34.99
£41.99 (inc. VAT)
Professional quality ratchet crimping tool for un-insulated crimp terminals Ergonomic handle design to reduce fatique "STEPPED ANVIL" type tool for simultaneous crimping of the insulation and conductor. Suitable for un-insulated crimp terminals which accept cables from 0.05 -6.0 mm2.
£23.95
£28.74 (inc. VAT)
Quality ratchet crimping tool for copper tube auto electrical terminals. This tool is suitable for use with copper tube type terminals from 0.3mm2- 16mm2
An alternative to our ALT/TN72-09 where space is limited.
An alternative to our ALT/TN72-09 where space is limited.
£112.80
£135.36 (inc. VAT)
Professional quality crimping tool for copper tube auto electrical terminals. This tool is suitable for eyelet terminals from 10mm2- 95mm2
£28.29
£33.95 (inc. VAT)
Quality ratchet crimping tool for copper tube auto electrical terminals. This tool is suitable for use with eyelet terminals from 2mm2- 25mm2
A perfect crimp is assured as the ratchet will not release until the crimp is perfectl...
A perfect crimp is assured as the ratchet will not release until the crimp is perfectl...
£3.25
£3.90 (inc. VAT)
ideal tool for the diy auto electrician or for the professional who wants a pocket sized piece of test equipment.
This extremely robust metal bodied device will detect voltages between 6 - 24vdc.
This extremely robust metal bodied device will detect voltages between 6 - 24vdc.
£79.78
£95.74 (inc. VAT)
Professional "HEX" crimping tool for terminals from 6mm2 - 50mm2 (#10 - #1 AWG)
£94.93
£113.92 (inc. VAT)
Professional "HEX" crimping tool for terminals from 25mm2 - 150mm2 (#4 - #300 AWG)
£26.86
£32.23 (inc. VAT)
HIGH GRADE Flux cored solder
18 SWG / 1.2mm /
60/40 (Sn/Pb)
500g reel
Supplied on heavy duty plastic reel
18 SWG / 1.2mm /
60/40 (Sn/Pb)
500g reel
Supplied on heavy duty plastic reel
£27.54
£33.05 (inc. VAT)
HIGH GRADE Flux cored solder
22 SWG / 0.8mm /
60/40 (Sn/Pb)
500g reel
22 SWG / 0.8mm /
60/40 (Sn/Pb)
500g reel
£13.95
£16.74 (inc. VAT)
Recent feedback about this item: "Fantastic bit of kit you can tell its a German design!"
THE BEES KNEES!
"You squeeze, it does the rest of the work for you!"
Crimper, stripper and cable cutter all in one unit
This easy to use fully au...
THE BEES KNEES!
"You squeeze, it does the rest of the work for you!"
Crimper, stripper and cable cutter all in one unit
This easy to use fully au...
£0.99
£1.19 (inc. VAT)
Pack of 2 fuse pullers suitable for both standard and mini automotive blade type fuses.
From:£4.00
£4.80 (inc. VAT)
Crimping pliers suitable for crimping PRE-INSULATED RED, BLUE & YELLOW insulated automotive terminals.
£20.93
£25.12 (inc. VAT)
Pair of PROFESSIONAL ratchet crimping pliers for pre-insulated RED, BLUE & YELLOW terminals
£8.29
£9.95 (inc. VAT)
ALT/TT304-1-01
Pair of crimping pliers suitable for insulated automotive terminals.
£28.27
£33.92 (inc. VAT)
Pair of ratchet crimping pliers for pre-insulated "FLAG" type terminals
£28.62
£34.34 (inc. VAT)
Pair of PROFESSIONAL ratchet crimping pliers for pre-insulated HEATSHRINK RED, BLUE & YELLOW terminals
£22.95
£27.54 (inc. VAT)
Pair of PROFESSIONAL ratchet crimping pliers for pre-insulated RED, BLUE & YELLOW terminals
£17.28
£20.74 (inc. VAT)
Ideal for automotive cable stripping and cutting.
This easy to use fully automatic tool will strip and cut cable from 0.5mm2 - 6mm2.
Auto adjustment for different sizes of cable.
This easy to use fully automatic tool will strip and cut cable from 0.5mm2 - 6mm2.
Auto adjustment for different sizes of cable.
£9.85
£11.82 (inc. VAT)
TINMANS SOLDER
40% Tin
0.25kg stick
ALT/SOL5-02
40% Tin
0.25kg stick
ALT/SOL5-02
