Millions of wiring terminals to suit practically every auto-electrical requirement

6.35mm Male, Female & Piggyback spade UN-INSULATED spade terminals.
POZILOK female spade terminals.
PCB mounting female spade terminals
All standard terminals available with or without locking barb.
Insulating covers available.
Supplied in packs of 25, 50, & 100.

Suitable for cable sizes 0.25mm2 - 1.5mm2 (#24 - #16AWG) Available hole sizes:- 3.2mm, 3.7mm, 4.3mm, 5.3mm, 6.4mm, 8.4mm & 10mm. Pack sizes:- 50. 100, & 500

6.35mm (1/4") BLUE FULLY PRE-INSULATED female spade terminal Suitable for cable sizes 1.10mm2 - 2.5mm2 (#17 AWG - #14 AWG) Pack sizes 25, 50, 100, 500 & 1000

RED BUTT SPLICE Pre-Insulated Suitable for cable sizes 0.25mm2 - 1.5mm2 (#24 - #16 AWG) Available in packs of 25, 50, 100, 500 or 1000

Red Heatshrink Pre-Insulated butt splices with hot melt adhesive, Suit cable sizes 0.25mm2 - 1.5mm2 (#24 AWG - #16 AWG) Available in packs of 25, 50, 100, 500 & 1000

6.35mm (1/4") RED FULLY PRE-INSULATED female spade terminal Suitable for cable sizes 0.25mm2 - 1.5mm2 (#24 AWG - #16 AWG) Pack sizes 25, 50, 100, 500 & 1000

4.8mm RED fully & partially insulated female spade crimp terminals Conforms to British Standards BS4579 and BS4G178

6.35mm (1/4") YELLOW FULLY PRE-INSULATED female spade terminal Suitable for cable sizes 2.70mm2 - 6.00mm2 (#14 AWG - #10 AWG) Pack sizes 25, 50, 100, 500 & 1000

Range of top quality EXTRA SMALL battery / starter ring /eyelet terminals.
Copper tube construction with tin plated outer
Suits cable sizes from 1.5mm2 (#18 AWG) - 4mm2 (#12 AWG).
Stud holes sizes from 4.00mm - 8.00mm
Click image to select size required

2.8mm Male & Female spade
UN-INSULATED spade terminal
Available with or without locking barb
Insulating covers available
Supplied in packs of 25, 50, & 100

BLUE BUTT SPLICE Pre-Insulated Suitable for cable sizes 1.1mm2 - 2.5mm2 Available in packs of 25, 50, 100, 500 or 1000

BLUE Heatshrink Pre-Insulated butt splices with hot melt adhesive, Suit cable sizes 1.1mm2 - 2.5mm2 (#17 AWG - #14 AWG) Available in packs of 25, 50, 100, 500 & 1000

6.35mm (1/4") BLUE PARTIALLY PRE-INSULATED "PIGGYBACK" female spade terminal Suitable for cable sizes 1.10mm2 - 2.50mm2 (#17 AWG - #14 AWG) Pack sizes 25, 50, 100, 500 & 1000

Suitable for cable sizes 1.10mm2 - 2.50mm2 (#17 - #14AWG) Available hole sizes:- 3.2mm, 3.7mm, 4.3mm, 5.3mm, 6.4mm, 8.4mm, 10.00mm & 13.00mm Pack sizes:- 50. 100, & 500

4.8mm BLUE fully & partially insulated female spade crimp terminals Conforms to British Standards BS4579 and BS4G178

POSITIVE battery terminal, intended to be soldered or crimped onto the cable
3 Cable entry sizes available

6.35mm (1/4") RED PARTIALLY PRE-INSULATED "PIGGYBACK" female spade terminal Suitable for cable sizes 0.25mm2 - 1.50mm2 (#24 AWG - #16 AWG) Pack sizes 25, 50, 100, 500 & 1000

You are buying an Insulation Displacement Connector (IDC), this product is generally known as a "SCOTCHLOK" due to first being produced by the 3M company, one of whose brand names is -Scotch-.
This product is a high quality copy of that product ...

6.35mm (1/4") YELLOW PARTIALLY PRE-INSULATED "PIGGYBACK" female spade terminal Suitable for cable sizes 2.70mm2 - 6.00mm2 (#14 AWG - #10 AWG) Pack sizes 25, 50, 100, 500 & 1000

4.8mm Male & Female spade
UN-INSULATED spade terminal.
Female available with or without locking barb.
Insulating covers available.
Supplied in packs of 25, 50, & 100.

NEGATIVE battery terminal, intended to be soldered or crimped onto the cable 3 sizes available

RED "Scotchlok" type insulation displacement connectors (IDC).
The RED type of IDC is ideal for the more modern vehicles were the wiring harness uses the thinner type "Thin Wall" cables i.e. 0.5mm - 1.5mm sq

6.35mm (1/4") BLUE PARTIALLY PRE-INSULATED female spade terminal Suitable for cable sizes 1.10mm2 - 2.50mm2 (#17 AWG - #14 AWG) Pack sizes 25, 50, 100, 500 & 1000

POSITIVE battery terminal, fitted with an M8 stud and nut to accept eyelet terminals.

6.35mm (1/4") RED PARTIALLY PRE-INSULATED female spade terminal Suitable for cable sizes 0.25mm2 - 1.50mm2 (#24 AWG - #16 AWG) Pack sizes 25, 50, 100, 500 & 1000

Pack of 5. Heavy duty SCOTCHLOK type connector for 3.00mm2 - 4.5mm2 cables

You are buying an Insulation Displacement Connector (IDC), this product is generally known as a "SCOTCHLOK" due to first being produced by the 3M company.

YELLOW BUTT SPLICE Pre-Insulated Suitable for cable sizes 1.1mm2 - 2.5mm2 Available in packs of 25, 50, 100, 500 or 1000

6.35mm (1/4") YELLOW PARTIALLY PRE-INSULATED female spade terminal Suitable for cable sizes 2.50mm2 - 6.00mm2 (#14 AWG - #10 AWG) Pack sizes 25, 50, 100, 500 & 1000

Pack of 10. Heavy duty SCOTCHLOK type connector for 4.0mm2 - 6.0mm2 cables

You are buying an Insulation Displacement Connector (IDC), this product is generally known as a "SCOTCHLOK" due to first being produced by the 3M company.

6.35mm (1/4") BLUE PARTIALLY PRE-INSULATED male spade terminal Suitable for cable sizes 1.10mm2 - 2.50mm2 (#17 AWG - #14 AWG) Pack sizes 25, 50, 100, 500 & 1000

NEGATIVE battery terminal, fitted with an M8 stud and nut to accept eyelet terminals.

6.35mm (1/4") RED PARTIALLY PRE-INSULATED male spade terminal Suitable for cable sizes 0.25mm2 - 1.50mm2 (#24 AWG - #16 AWG) Pack sizes 25, 50, 100, 500 & 1000

6.35mm (1/4") YELLOW PARTIALLY PRE-INSULATED male spade terminal Suitable for cable sizes 2.70mm2 - 6.00mm2 (#14 AWG - #10 AWG) Pack sizes 25, 50, 100, 500 & 1000

6.35mm ***FLAG TYPE *** Female spade
UN-INSULATED spade terminal.
Supplied in packs of 10 & 50.

9.50mm Female spade UN-INSULATED spade terminal.
Available with or without locking barb.
Insulating covers available.
Cable sizes:- 1.50 - 2.5mm2, 2.50 - 4.00mm2, 4.00 - 6.00mm2, 6.00 - 10.00mm2.
Supplied in packs of 10, 25, 50.

POSITIVE battery terminal, fitted with two cable clamp screws.
Three sizes available
40mm2 , 60mm2 & 95mm2 cable sizes.

Plastic compartmented box with transparent lid (215 x 140 x 45mm approx).
Kit contains 168 terminals & 96 covers, comprising an assortment of 7 of the most popular male & female crimp terminals and insulating covers.
Sizes range:- 2.8, 6.3 & 9.5mm

Negative battery terminal, fitted with two cable clamp screws.
Three sizes available
40mm2 , 60mm2 cable & 95mm2 sizes.

UN-INSULATED BUTT SPLICES Suitable for cables from 1mm2 -120mm2 ( #10 AWG - #4/0 AWG) Can be crimped or soldered Supplied in packs of 1 -10, dependent upon splice size

Male & female Superseal wiring terminals
Cavity plugs
Cable seals

Positive battery terminal, fitted with an M10 stud and nut to accept eyelet terminals.

Negative battery terminal, fitted with an M10 (10mm) stud and nut to accept eyelet terminals.

OFFSET CONNECTION NEGATIVE BATTERY TERMINAL

OFFSET CONNECTION POSITIVE BATTERY TERMINAL

Male & female Superseal wiring terminals
Cavity plugs
Cable seals

PAIR of QUICK RELEASE positive and negative battery terminals suitable for caravans, trailer tents, motor homes, boats, etc etc.
Simply lift up the insulating colour coded cap and pull the terminal off.

Pair of battery terminals
Positive & Negative battery terminals, suitable for crimping or attaching the cable via an eyelet type fastener.
Clearly marked with coloured polarity inserts.
Crimping method, will acc...

These ANDERSON terminals are suitable for currents of 20 - 350 Amps. The range encompasses the whole ANDERSON range from 30Amp PowerPole to the massive 350Amp SB-350. All contacts are sold in pairs.

Range of top quality battery / starter, ring /eyelet terminals.
Copper tube construction with tin plated outer
Our "LARGE" Range covers cable sizes from 70mm2 (#2/0 AWG) - 240mm2 (#500 AWG)
Stud holes sizes from 6mm - 16mm
Click image to select size required

Range of top quality battery / starter ring /eyelet terminals.
Copper tube construction with tin plated outer
Suits cable sizes from
6mm2 (#10 AWG) - 50mm2 (#1 AWG).
Stud holes sizes from 5mm - 16mm
Click image to select size required

Range of 90 DEGREE ANGLED top quality battery / starter, ring /eyelet terminals.
Copper tube construction with tin plated outer
Click image to select size required

BLUE BUTT SPLICE Pre-Insulated Suitable for cable sizes 1.1mm2 - 2.5mm2 Available in packs of 25, 50, 100, 500 or 1000

5.0mm BLUE fully insulated female bullet crimp terminals Conforms to British Standards BS4579 and BS4G178 Accepts cable sizes 1.1mm2 - 2.5mm2 (#17 - #14 AWG)

5.0mm BLUE fully insulated male bullet crimp terminals Conforms to British Standards BS4579 and BS4G178 Accepts cable sizes 1.1mm2 - 2.5mm2 (#17 - #14 AWG)

Classic style "BULLET" 2 way female connector suitable for classic motorcycle and classic car wiring. Packs of 20 or 100 available

4.7mm bullets Classic style "BULLET" connector suitable for classic motorcycle and classic car wiring. Pack sizes of 20 or 100

Classic style "BULLET" 4.7mm 4 way female connector suitable for classic motorcycle and classic car wiring. Available in packs of 20 or 100

Pre-insulated "Flag" type terminals
Available in Red or Blue
Packs of 10 or 100

Range of push-in connectors
2 - 8 way
Will accept cables up to 2.5mm2
24 Amp capacity Sold in packs of 5

3.9mm Japanese style "crimp on" female brass or tinned brass bullet connectors complete with soft PVC insulating covers

3.9mm Japanese style "crimp on" male brass or tinned brass bullet connectors complete with soft PVC insulating covers

3.9mm Japanese style "crimp on" female twin bullet connectors complete with soft PVC insulating covers

RED BUTT SPLICE Pre-Insulated Suitable for cable sizes 0.25mm2 - 1.5mm2 (#24 - #16 AWG) Available in packs of 25, 50, 100, 500 or 1000

4.0mm RED fully insulated female bullet crimp terminals Conforms to British Standards BS4579 and BS4G178 Accepts cable sizes 0.65mm2 - 1.5mm2 (#20 - #16 AWG)

2.8mm (1/8") RED fully insulated female spade terminals Pack sizes of 25 / 50 / 100 /500 / 1000 available. Conforms to British Standards BS4579 and BS4G178

4.0mm RED fully insulated male bullet crimp terminals Conforms to British Standards BS4579 and BS4G178 Accepts cable sizes 0.65mm2 - 1.5mm2 (#20 - #16 AWG)

2.8mm (1/8") RED partially insulated female spade terminals Pack sizes of 25 / 50 / 100 /500 / 1000 available. Conforms to British Standards BS4579 and BS4G178

Tinned copper open end terminals
Range of sizes to suit 0.5mm2 - 70mm2 cabling
Click image to select size

YELLOW BUTT SPLICE Pre-Insulated Suitable for cable sizes 1.1mm2 - 2.5mm2 Available in packs of 25, 50, 100, 500 or 1000

5.0mm YELLOW fully insulated female bullet crimp terminals Conforms to British Standards BS4579 and BS4G178 Accepts cable sizes 2.7mm2 - 6.0mm2 (#14 - #10 AWG)

9.5mm YELLOW FULLY PRE-INSULATED female spade terminal Suitable for cable sizes 2.50mm2 - 6.00mm2 (#14 AWG - #10 AWG) Pack sizes 25, 50, 100, 500 & 1000

YELLOW Heatshrink Pre-Insulated butt splices with hot melt adhesive, Suit cable sizes 2.70mm2 - 6.00mm2 (#13 AWG - #10 AWG) Available in packs of 25, 50, 100, 500 & 1000

5.0mm YELLOW fully insulated male bullet crimp terminals Conforms to British Standards BS4579 and BS4G178 Accepts cable sizes 2.7mm2 - 6.0mm2 (#14 - #10 AWG)

9.5mm YELLOW PARTIALLY PRE-INSULATED female spade terminal Suitable for cable sizes 2.50mm2 - 6.00mm2 (#14 AWG - #10 AWG) Pack sizes 25, 50, 100, 500 & 1000

YELLOW Pre-Insulated Ring / Eyelet terminal Suitable for cable sizes 2.70mm2 - 6.00mm2 (#14 - #10 AWG) Available hole sizes:- 4.3mm, 5.3mm, 6.4mm, 8.4mm, 10.00mm & 13.00mm Pack sizes:- 25, 50. 100, & 500