Positive Battery Terminal with M10 stud and nut
ALT/BT10POS-02

PVC battery post terminal covers to be used with straight car battery terminals.
Similar to our ALT/BTC60R/B but shallower and shorter

Range of top quality EXTRA SMALL battery / starter ring /eyelet terminals.
Copper tube construction with tin plated outer
Suits cable sizes from 1.5mm2 (#18 AWG) - 4mm2 (#12 AWG).
Stud holes sizes from 4.00mm - 8.00mm
Click image to select size required

250 / 2500 Amp rated, TOP QUALITY battery isolator switch with removable key T.I.R. Rated

PAIR ( Red & Black) of PVC battery post terminal covers to be used with standard type battery terminals.
Fits our battery terminals:- ALT/BT450 & ALT/BT451

POSITIVE battery terminal, intended to be soldered or crimped onto the cable
3 Cable entry sizes available

Range of top quality battery / starter ring /eyelet terminals.
Copper tube construction with tin plated outer
Suits cable sizes from
6mm2 (#10 AWG) - 50mm2 (#1 AWG).
Stud holes sizes from 5mm - 16mm
Click image to select size required

PAIR ( Red & Black) of PVC battery post terminal covers to be used with standard type battery terminals.
Fits our battery terminals:- ALT/BT450 & ALT/BT451

NEGATIVE battery terminal, intended to be soldered or crimped onto the cable 3 sizes available

Range of top quality battery / starter, ring /eyelet terminals.
Copper tube construction with tin plated outer
Our "LARGE" Range covers cable sizes from 70mm2 (#2/0 AWG) - 240mm2 (#500 AWG)
Stud holes sizes from 6mm - 16mm
Click image to select size required

Ideal for disconnecting the vehicles main battery cable feed to prevent battery discharge

PAIR ( Red & Black) of PVC battery post terminal covers to be used with standard type battery terminals.
Fits our battery terminals:- ALT/BT450 & ALT/BT451

POSITIVE battery terminal, fitted with an M8 stud and nut to accept eyelet terminals.

You are buying a PAIR ( Red & Black) of PVC battery post terminal covers to be used with standard type battery terminals.
Fits our battery terminals:- ALT/BT450 & ALT/BT451

NEGATIVE battery terminal, fitted with an M8 stud and nut to accept eyelet terminals.

Red & Black PVC battery post terminal covers to be used with straight car battery terminals.
Fits our battery terminals:- ALT/BT472, ALT/BT474& ALT/BT475

Tinned & Non-tinned copper open end terminals
Range of sizes to suit 0.5mm2 - 70mm2 cabling
Click image to select size

Durite battery terminal cover
POSITIVE
Rubber

Positive Battery Terminal with**INBUILT CUBE FUSE** facility

PVC battery post terminal covers to be used with STUD type battery terminals.
Available in pairs or individually
Fits our ALT/BT4POS, ALT/BT4NEG, ALT/BT5P, ALT/BT5N, ALT/BT10POS & ALT/BT10NEG battery terminals

POSITIVE battery terminal, fitted with two cable clamp screws.
Three sizes available
40mm2 , 60mm2 & 95mm2 cable sizes.

AC4 eyelet / battery terminal covers.
Available in either RED or Black.

Negative battery terminal, fitted with two cable clamp screws.
Three sizes available
40mm2 , 60mm2 cable & 95mm2 sizes.

Battery terminal with M10 stud fitted with wing nut fixing ALT/BT5Nor ALTP

Negative battery terminal, fitted with an M10 (10mm) stud and nut to accept eyelet terminals.

OFFSET CONNECTION NEGATIVE BATTERY TERMINAL

OFFSET CONNECTION POSITIVE BATTERY TERMINAL

PAIR of QUICK RELEASE positive and negative battery terminals suitable for caravans, trailer tents, motor homes, boats, etc etc.
Simply lift up the insulating colour coded cap and pull the terminal off.

Pair of battery terminals
Positive & Negative battery terminals, suitable for crimping or attaching the cable via an eyelet type fastener.
Clearly marked with coloured polarity inserts.
Crimping method, will acc...