Cart: 0 item (s) - £0.00

Screwdrivers (Various)

Screwdrivers    (Various)
Select your option from the RED BOX below:
SCREWDRIVER
£1.50 excluding VAT
£1.80 including VAT
Part ref Type of tip Tip Length
ALT/TL223 slotted /flat 5mm 75mm
ALT/TL224 slotted / flat 6mm 100mm
ALT/TL225 slotted /flat 6mm 150mm
ALT/TL226 slotted /flat 8mm 200mm
ALT/TL227 slotted/flat 8mm 250mm
ALT/TL228 Pozidrive  No1  75mm
ALT/TL229 Pozidrive No 2 100mm
ALT/TL230 Pozidrive No 3 150mm


A range of good quality, soft grip, "hammer-through" hexagon  shafted screwdrivers manufactured by Silverline

Please use the drop-down menu in the  RED BOX  to make your selection 
Related Products
Fuse tester / remover Top quality Mfd by Littelfuse <br>  (Littelfuse Inc 00970019X)<br>ALT/FBT-01
£5.97
£7.16 (inc. VAT)
Invaluable tool for diagnosing blown fuses on 12v & 24v electrical systems
Crimping tool for UNINSULATED terminals  ALT/TT70-01
£4.12
£4.94 (inc. VAT)
Crimping tool for UN-INSULATED auto electrical terminals. Tool gives "fold-in" type crimp (See images) The tool has a built-in cable stripper, cable cutter and a five hole bolt cutter (for bolts from M2.6 - M5).
Mains voltage powered 60W soldering iron ALT/SDO112707-06
£6.75
£8.10 (inc. VAT)
240v powered soldering iron 60W heat output
PROFESSIONAL Crimping tool for UNINSULATED terminals <br>ALT/TT71-01
£9.12
£10.94 (inc. VAT)
PROFESSIONAL crimping tool for UN-INSULATED auto electrical terminals. Spring loaded handles Tool gives "fold-in" type crimp (see images)
Bullet terminal CRIMP tool         <BR>ALT/SSCT1-02
£25.35
£30.42 (inc. VAT)
Classic style "BULLET" crimping tool for English style bullet terminals.
Classic crimping tool, saves all that soldering!
DURITE 0-534-26       6v - 24v Heavy duty cable piercing test probe
£9.18
£11.02 (inc. VAT)
Heavy Duty DURITE 6-24v Dc Automotive Circuit Tester
Cable piercing test probe
DURITE 0-534-70      <br> 6v -12- 24v Energy probe
£41.68
£50.02 (inc. VAT)
DURITE 0-534-70
Energy Probe
6-12-24vdc
Professional butane powered soldering iron ALT/PORTOSOL-SOL8-02
£33.29
£39.95 (inc. VAT)
In our opinion the finest gas soldering iron on the market.
Full range of interchangable tips are available for a range of uses, hot air blast, plastic cutting etc etc.
The SuperPro comes with Piezo ignition for convenience.
Switch on / ig...
Professional quality crimping tool for un-insulated crimp terminals<br>ALT/TT72-01
£14.95
£17.94 (inc. VAT)
Professional quality crimping tool for un-insulated crimp terminals
Suitable for cable sizes from 0.25mm2 (#24 AWG) - 1.5mm2 (#18 AWG) terminals & cable sizes
Ideally suited to our SuperSeal multi-way connector and extremely small terminals.
16 SWG / 1.6mm SOLDER (Flux cored) 0.5kg reel <br>ALT/SOL1-02
£12.98
£15.58 (inc. VAT)
Flux cored solder
16 SWG / 1.6mm / 0.064"
40/60 (Sn/Pb)
500g reel
ANTEX 0.8mm LEAD FREE   SOLDER (Flux cored) <br>4 metres <br>ALT/SOL-SD137402-06
£3.55
£4.26 (inc. VAT)
ANTEX lead free solder
99.25% Tin
4 metres of solder in dispenser
Professional quality ratchet crimping tool for un-insulated crimp terminals<br>ALT/TT73-01
£18.95
£22.74 (inc. VAT)
Professional quality ratchet crimping tool for un-insulated crimp terminals
"Stepped anvils" to allow simultaneous crimping of the insulation and conductor
Suitable for cable sizes from 0.5mm2 (#20 AWG) - 6mm2 (#10 AWG) terminals & cable sizes
Ideally suited to our SuperSeal multi-way connector terminals.
Professional quality ratchet crimping tool for un-insulated crimp terminals <br>ALT/TT74-02
£21.75
£26.10 (inc. VAT)
Professional quality ratchet crimping tool for un-insulated crimp terminals "Stepped anvils" to allow simultaneous crimping of the insulation and conductor Suitable for crimp terminals from 1.5mm2 -10mm2 terminals
FLAG TERMINAL (UNINSULATED TYPE) CRIMPING TOOL   ALT/TT160
£42.55
£51.06 (inc. VAT)
Professional quality ratchet crimping tool for un-insulated FLAG crimp terminals "STEPPED ANVIL" type tool for simultaneous crimping of the insulation and conductor.
PLUG - IN CURRENT TESTER Two models available (Standard & Mini Blade formats)
£12.56
£15.07 (inc. VAT)
Ideal circuit tester
Simply plugs into the fuse box and reads the current flowing in the circuit
Two models available "Standard blade fuse" model & "Mini/Micro blade fuse model"
Professional quality ratchet STEPPED ANVIL crimp tool for uninsulated crimp terminals<br>ALT/TN73-09
£29.99
£35.99 (inc. VAT)
Professional quality ratchet crimping tool for un-insulated crimp terminals Ergonomic handle design to reduce fatique "STEPPED ANVIL" type tool for simultaneous crimping of the insulation and conductor. Suitable for un-insulated crimp terminals which accept cables from 0.05 -6.0 mm2.
BATTERY / STARTER TERMINAL RATCHET CRIMPING TOOL <br>ALT/CMP7-02
£19.95
£23.94 (inc. VAT)
Quality ratchet crimping tool for copper tube auto electrical terminals. This tool is suitable for use with copper tube type terminals from 0.3mm2- 16mm2
An alternative to our ALT/TN72-09 where space is limited.
CAR DOOR TRIM REMOVAL KIT             ALT/TL246
£12.95
£15.54 (inc. VAT)
4 piece Car Door Trim Remover Set
BATTERY / STARTER TERMINAL CRIMPING TOOL <br>ALT/TT80-01
£71.62
£85.94 (inc. VAT)
Professional quality crimping tool for copper tube auto electrical terminals. This tool is suitable for eyelet terminals from 10mm2- 95mm2
BATTERY / STARTER TERMINAL RATCHET CRIMPING TOOL<br>  ALT/TN72-09
£28.29
£33.95 (inc. VAT)
Quality ratchet crimping tool for copper tube auto electrical terminals. This tool is suitable for use with eyelet terminals from 2mm2- 25mm2
A perfect crimp is assured as the ratchet will not release until the crimp is perfectl...
6 -24 volt cable piercing test probe  ALT/CUT9-02
£3.25
£3.90 (inc. VAT)
ideal tool for the diy auto electrician or for the professional who wants a pocket sized piece of test equipment.
This extremely robust metal bodied device will detect voltages between 6 - 24vdc.
Indentation type  crimp tool for copper tube uninsulated terminals from 6mm2 - 120mm2<br>ALT/TT83-01
£13.99
£16.79 (inc. VAT)
Professional "Indentation" crimping tool for terminals from 6mm2 - 120mm2 (#10 - #1 AWG)
TRIM CLIP REMOVAL PLIERS        ALT/TL247
£7.85
£9.42 (inc. VAT)
235mm Trim Clip Removal Pliers
Professional crimping tool for copper tube uninsulated terminals from 6mm2 - 50mm2  ALT/CMP8-02
£68.75
£82.50 (inc. VAT)
Professional "HEX" crimping tool for terminals from 6mm2 - 50mm2 (#10 - #1 AWG)
TRIM CLIP REMOVAL SET              ALT/TL248
£8.20
£9.84 (inc. VAT)
5 Piece Trim Clip Removal Set. For removal of upholstery, clips, trims, mouldings & wheel hubs.
Professional crimping tool for copper tube uninsulated terminals from 25mm2 - 150mm2 ALT/CMP9-02
£87.70
£105.24 (inc. VAT)
Professional "HEX" crimping tool for terminals from 25mm2 - 150mm2 (#4 - #300 AWG)
Professional crimping tool for copper tube uninsulated terminals from 6mm2 - 120mm2 ALT/CMP17-02
£79.75
£95.70 (inc. VAT)
Professional "HEX" crimping tool for terminals from 6mm2 - 120mm2 (#16 - #0000 AWG)
18 SWG / 1.2mm /   SOLDER (Flux cored) 0.5kg reel <br>ALT/SOL4-02
£15.95
£19.14 (inc. VAT)
HIGH GRADE Flux cored solder
18 SWG / 1.2mm /
60/40 (Sn/Pb)
500g reel
Supplied on heavy duty plastic reel
22 SWG / 0.8mm /   SOLDER (Flux cored) 0.5kg reel <br>ALT/SOL3-02
£15.95
£19.14 (inc. VAT)
HIGH GRADE Flux cored solder
22 SWG / 0.8mm /
60/40 (Sn/Pb)
500g reel
Automotive fuse puller x 2       <BR>ALT/FBE-01
£0.99
£1.19 (inc. VAT)
Pack of 2 fuse pullers suitable for both standard and mini automotive blade type fuses.
Automotive insulated terminal crimping tool ALT/TT301-01
£4.00
£4.80 (inc. VAT)
Crimping pliers suitable for crimping PRE-INSULATED RED, BLUE & YELLOW insulated automotive terminals.
CABLE REEL HOLDER - WALL MOUNTED   ALT/ECR1
£12.95
£15.54 (inc. VAT)
Cable Reel Holder
(wall-mountable)
Crimping tool (Ratchet type) for pre-insulated RED, BLUE & YELLOW terminals <br> ALT/TT308-01
£14.95
£17.94 (inc. VAT)
Pair of PROFESSIONAL ratchet crimping pliers for pre-insulated RED, BLUE & YELLOW terminals
Crimping tool /Crimp tool for insulated terminals<br> ALT/TT304-01
£8.29
£9.95 (inc. VAT)
Pair of crimping pliers suitable for insulated automotive terminals.
Crimping tool for pre-insulated "FLAG" type terminals ALT/CMP4-02
£28.27
£33.92 (inc. VAT)
Pair of ratchet crimping pliers for pre-insulated "FLAG" type terminals
Crimping tool for pre-insulated HEATSHRINK TYPE RED, BLUE & YELLOW terminals  ALT/CMP15-02
£22.75
£27.30 (inc. VAT)
Pair of PROFESSIONAL ratchet crimping pliers for pre-insulated HEATSHRINK RED, BLUE & YELLOW terminals
Crimping tool for pre-insulated RED, BLUE & YELLOW terminals  ALT/CMP3-02
£22.95
£27.54 (inc. VAT)
Pair of PROFESSIONAL ratchet crimping pliers for pre-insulated RED, BLUE & YELLOW terminals
Empty Storage Box (Multi-compartment)  ALT/KB01
£4.49
£5.39 (inc. VAT)
Empty storage box with hinged lid, complete with 12 removable partitions enabling the box to have between 6 and 18 compartments
SUPERSEAL / Econoseal  CRIMPING TOOL - ALT/TT77-01
£29.75
£35.70 (inc. VAT)
Ratchet crimping tool especially designed to crimp  "Econoseal" and "Superseal" terminals.
TENMA RELAY TESTER        <br> ALT/IN06647-06
£23.99
£28.79 (inc. VAT)
•AUTOMOTIVE RELAY TESTER
•A quick Go/No Go tester for automotive relays
TINMANS STICK SOLDER  40% Tin /  60% Lead 0.25kg stick <BR>ALT/SOL5-02
£7.80
£9.36 (inc. VAT)
TINMANS SOLDER
40% Tin
0.25kg stick
ALT/SOL5-02
Wiring terminal and crimp tool kit<br> ALT/K107-01
£8.29
£9.95 (inc. VAT)
You are buying 175 assorted wiring terminals and a professional crimp tool.
Guaranteed Next Working Day Delivery Service Available
Please contact us for full details