We are a fully authorised Sterling Power UK account holding company
ALT/BB241235 Sterling Power 35amp Automatic 24V DC to 12V DC Battery to Battery Charger
Simple and effective way to charge a 12v battery bank from a 24v vehicle charging system achieving up to a 35amp 12v output.
Sterling's range of Battery to Battery Chargers (B2Bs) has grown significantly over the past few years. This is in an effort to supplement the ever growing demand from the commercial vehicle, recreational vehicle and marine industries.
Suitable for all modern vehicles including Mercedes Blue Efficiency Sprinters, VW T5 and T6 Blue motion and Fords Econetic Transits. The B2Bs have become extremely popular as they fast charge batteries as you cruise along without the need for complex wiring, touching your alternator, voiding the alternator's warranty and tampering with the electronic control units (ECUs).
You can provide the on-board batteries with a fast 4 stage charging profile with a very simple and speedy installation. All of the benefits of advanced charging without any of the drawbacks.
Simply connect the B2B between the battery being charged and the battery you wish to charge.
Buy with complete confidence
Please Click on the link below for more information on this product
Multiple Activation Modes: Automatic for most non vehicle applications,
Manual for remote activation.
Regenerative braking (requiring ignition feed),
Automatic regenerative braking, requiring no ignition feed.
Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this.
100% fire proof plastic box.
No screws to corrode.
Thermal power reduction.
Multi-stage fan cooling
Night Time Setting: Allows the unit to run at half the power so the fan noise is kept down.
Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages.
B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V).
9 x Customizable Profile: Choose your own charging profile from on the front panel.
9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid.
4 stage battery charging: These B2B units charge batteries between 5-20 times faster than a stand alone alternator.
Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking).
Remote control optional.