Cart: 0 item (s) - £0.00
STERLING POWER PRO-SPLIT D Low Volt Drop Split Charge Units
We are a fully authorised Sterling Power UK account holding company
Buy with complete confidence
High current split charge units
Extremely easy to install
10 models available
One alternator input & up to 3 outputs
Amperages from 70A - 200A
Suitable for any input voltage 12v , 24v, 36v, 48v, etc
"Split charge diodes: By using a set of diodes on a heat sink, one can ensure no back feed through the diode, thus ensuring that high currents from other battery banks do not flow up the charge lines and cause a fire. This is the most common method by far employed round the world and is the standard in the USA, for 3 reasons, safety, safety and safety, by the way did I say safety?"
We are a fully authorised Sterling Power UK account holding company
Buy with complete confidence
High current split charge units
Extremely easy to install
10 models available
One alternator input & up to 3 outputs
Amperages from 70A - 200A
Suitable for any input voltage 12v , 24v, 36v, 48v, etc
"Split charge diodes: By using a set of diodes on a heat sink, one can ensure no back feed through the diode, thus ensuring that high currents from other battery banks do not flow up the charge lines and cause a fire. This is the most common method by far employed round the world and is the standard in the USA, for 3 reasons, safety, safety and safety, by the way did I say safety?"
| Alternator inputs | Battery Banks | Max Alternator Current | Part number |
|---|---|---|---|
| 1 | 2 | 70 | ALT/D70A2 |
| 1 | 3 | 70 | ALT/D70A3 |
| 1 | 2 | 90 | ALT/D90A2 |
| 1 | 3 | 90 | ALT/D90A3 |
| 1 | 2 | 130 | ALT/D130A2 |
| 1 | 3 | 130 | ALT/D130A3 |
| 1 | 2 | 160 | ALT/D160A2 |
| 1 | 3 | 160 | ALT/D160A3 |
| 1 | 2 | 200 | ALT/D200A2 |
| 1 | 3 | 200 | ALT/D200A3 |
Related Products
From:£2.70
£3.24 (inc. VAT)
Professional quality automotive MEGA fuse. Range from 40 Amp to 500 Amp,
From:£1.93
£2.32 (inc. VAT)
Professional quality automotive MIDI fuse holder
NEW! BULK PACK DISCOUNT PRICES
£168.79
£202.55 (inc. VAT)
NEMO DDX1230 BATTERY TO BATTERY CHARGER with inbuilt solar panel controller 12V - 12V 30Amp
Inbuilt SOLAR controller Fully supports SMART Euro 5 & Euro 6 engine technology
Lithium battery compatible
Charge a 12v battery from a 12v vehicle supply at up to 30Amp
Ideal solution for charging an auxiliary battery on vehicles equipped with regenerative braking systems.
Inbuilt SOLAR controller Fully supports SMART Euro 5 & Euro 6 engine technology
Lithium battery compatible
Charge a 12v battery from a 12v vehicle supply at up to 30Amp
Ideal solution for charging an auxiliary battery on vehicles equipped with regenerative braking systems.
From:£3.25
£3.90 (inc. VAT)
UK Manufactured Top Quality
16mm2 / #6 AWG cable
Available in PVC Copper & PVC Tinned variants
Available by the metre, 10mtr, 30mtr & 100mtr reels
From:£38.95
£46.74 (inc. VAT)
100 Amp 24volt split charge relay
VOLTAGE SENSING
Very simple to install
3 Connections to make
Power in, Power out & negative...that's it!
Available as a control unit only or as a fully assembled kit
VOLTAGE SENSING
Very simple to install
3 Connections to make
Power in, Power out & negative...that's it!
Available as a control unit only or as a fully assembled kit
From:£5.25
£6.30 (inc. VAT)
25mm2 Battery cable
Sold by the metre or multiples of
Reel sizes available 10, 30, 100mtrs
"Tinned" also available for marine use
From:£29.95
£35.94 (inc. VAT)
60 Amp 12volt split charge relay
VOLTAGE SENSING
Very simple to install
3 Connections to make
Power in, Power out & negative...that's it!
Available as a control unit only or as a fully assembled kit
VOLTAGE SENSING
Very simple to install
3 Connections to make
Power in, Power out & negative...that's it!
Available as a control unit only or as a fully assembled kit
From:£29.95
£35.94 (inc. VAT)
ALTEC 140Amp 12 volt split charge relay
VOLTAGE SENSING
Very simple to install
Also available as a fully built kit.
VOLTAGE SENSING
Very simple to install
Also available as a fully built kit.
£0.25
£0.30 (inc. VAT)
Range of top quality EXTRA SMALL battery / starter ring /eyelet terminals.
Copper tube construction with tin plated outer
Suits cable sizes from 1.5mm2 (#18 AWG) - 4mm2 (#12 AWG).
Stud holes sizes from 4.00mm - 8.00mm
Click image to select size required
Copper tube construction with tin plated outer
Suits cable sizes from 1.5mm2 (#18 AWG) - 4mm2 (#12 AWG).
Stud holes sizes from 4.00mm - 8.00mm
Click image to select size required
£367.33
£440.80 (inc. VAT)
DURITE EURO 6
30Amp 24 volt - 12 volt ELECTRONIC split charge relay
VOLTAGE SENSING
Very simple to install
30Amp 24 volt - 12 volt ELECTRONIC split charge relay
VOLTAGE SENSING
Very simple to install
From:£2.10
£2.52 (inc. VAT)
THIN WALL 10mm2 / #8 AWG 80/0.40 AUTOMOTIVE CABLE
70.00 AMP 840 WATTS RATED
Various colours available
£5.41
£6.49 (inc. VAT)
7 Pin 12N Plastic trailer pre-wired electrical socket.
From:£0.24
£0.29 (inc. VAT)
Range of top quality battery / starter ring /eyelet terminals.
Copper tube construction with tin plated outer
Suits cable sizes from
6mm2 (#10 AWG) - 50mm2 (#1 AWG).
Stud holes sizes from 5mm - 16mm
Click image to select size required
Copper tube construction with tin plated outer
Suits cable sizes from
6mm2 (#10 AWG) - 50mm2 (#1 AWG).
Stud holes sizes from 5mm - 16mm
Click image to select size required
From:£1.03
£1.24 (inc. VAT)
Range of top quality battery / starter, ring /eyelet terminals.
Copper tube construction with tin plated outer
Our "LARGE" Range covers cable sizes from 70mm2 (#2/0 AWG) - 240mm2 (#500 AWG)
Stud holes sizes from 6mm - 16mm
Click image to select size required
Copper tube construction with tin plated outer
Our "LARGE" Range covers cable sizes from 70mm2 (#2/0 AWG) - 240mm2 (#500 AWG)
Stud holes sizes from 6mm - 16mm
Click image to select size required
From:£4.89
£5.87 (inc. VAT)
Professional quality automotive MEGA fuse holder.
BULK PACKS AVAILABLE, 10, 50, 100
£59.99
£71.99 (inc. VAT)
100Amp 24 volt split charge relay
VOLTAGE SENSING
Very simple to install
3 Connections to make
Power in, Power out & negative...that's it!
VOLTAGE SENSING
Very simple to install
3 Connections to make
Power in, Power out & negative...that's it!
£29.12
£34.94 (inc. VAT)
Easy installation
Fully assembled wiring harness supplied
NON-Voltage sensing 12volt system
Fully assembled wiring harness supplied
NON-Voltage sensing
From:£4.77
£5.72 (inc. VAT)
Professional quality automotive IN-LINE MEGA fuse holder Two versions available to suit differing cable sizes
£2.75
£3.30 (inc. VAT)
7 pin 12S towing electrical socket
From:£1.05
£1.26 (inc. VAT)
Professional quality automotive 40mm MIDI fuses.
MIDI fuses range from 30 Amp to 200 Amp
MIDI fuses range from 30 Amp to 200 Amp
£2.45
£2.94 (inc. VAT)
7 pin 12N towing electrical socket
£0.90
£1.08 (inc. VAT)
Range of 90 DEGREE ANGLED top quality battery / starter, ring /eyelet terminals.
Copper tube construction with tin plated outer
Click image to select size required
Copper tube construction with tin plated outer
Click image to select size required
£13.35
£16.02 (inc. VAT)
Voltage Sensitive 30 Amp fridge and auxiliary battery split-charge relay for caravan/motorhome or trailer.
From:£0.09
£0.11 (inc. VAT)
Tinned & Non-tinned copper open end terminals
Range of sizes to suit 0.5mm2 - 70mm2 cabling
Click ON THE RED BOX to select size
Range of sizes to suit 0.5mm2 - 70mm2 cabling
Click ON THE RED BOX to select size
From:£7.25
£8.70 (inc. VAT)
UK Manufactured
35mm2 CSA (Cross sectional area)
(#2.0 AWG)
451/0.30 strands
PVC INSULATED 240.00 AMP CABLE.
Available in RED or BLACK
Tinned cable for MARINE use available
£49.95
£59.94 (inc. VAT)
12 - 14vdc CONTACTOR - up to 725Amp current handling (Allbright International) ALT/CONT19-5014-07
Extremely heavy duty relay unit
Extremely heavy duty relay unit
£35.19
£42.23 (inc. VAT)
Part Number: 0-727-23
£284.16
£340.99 (inc. VAT)
Part Number: 0-852-52
£9,999.99
£11,999.99 (inc. VAT)
Part Number: 0-852-63 DISCONTINUED NOW REPLACED BY 0-852-62 30Amp model
£284.16
£340.99 (inc. VAT)
Part Number: 0-852-52
£50.01
£60.01 (inc. VAT)
Part Number: 0-727-33
£53.95
£64.74 (inc. VAT)
24 - 28vdc CONTACTOR 12- up to 725Amp current handling (Allbright International) ALT/CONT19-5015-07
Extremely heavy duty relay unit
Extremely heavy duty relay unit
£284.16
£340.99 (inc. VAT)
Part Number: 0-852-50
£267.81
£321.37 (inc. VAT)
Part Number: 0-852-73
£367.33
£440.80 (inc. VAT)
Part Number: 0-852-72
£284.16
£340.99 (inc. VAT)
Part Number: 0-852-53
£51.51
£61.81 (inc. VAT)
Part Number: 0-727-83
From:£7.85
£9.42 (inc. VAT)
* UK MANUFACTURED *
40mm2 CSA (Cross sectional area)
(#1.5 AWG)
539/0.30 strands
PVC INSULATED 300.00 AMP CABLE.
Available in RED or BLACK
Also available as Tinned cable for MARINE use available in 16mm2, 25mm2, 35mm2, 50mm2, 70mm2 & 95mm2 sizes
40mm2 CSA (Cross sectional area)
(#1.5 AWG)
539/0.30 strands
PVC INSULATED 300.00 AMP CABLE.
Available in RED or BLACK
Also available as Tinned cable for MARINE use available in 16mm2, 25mm2, 35mm2, 50mm2, 70mm2 & 95mm2 sizes
£285.27
£342.32 (inc. VAT)
Part Number: 0-852-30
£60.72
£72.86 (inc. VAT)
Part Number: 0-727-43
£284.16
£340.99 (inc. VAT)
Part Number: 0-852-51
