STERLING POWER PRO-SPLIT Diode Split Charge Units
We are a fully authorised Sterling Power UK account holding company
Buy with complete confidence
High current split charge units
Extremely easy to install
Amperages from 70A - 200A
Suitable for any input voltage 12v , 24v, 36v, 48v, etc
"Split charge diodes: By using a set of diodes on a heat sink, one can ensure no back feed through the diode, thus ensuring that high currents from other battery banks do not flow up the charge lines and cause a fire. This is the most common method by far employed round the world and is the standard in the USA, for 3 reasons, safety, safety and safety, by the way did I say safety?"
| Alternator inputs | Battery Banks | Max Alternator Current | Part number |
|---|---|---|---|
| 1 | 2 | 70 | ALT/D70A2 |
| 1 | 2 | 90 | ALT/D90A2 |
| 1 | 2 | 130 | ALT/D130A2 |
| 1 | 2 | 160 | ALT/D160A2 |
| 1 | 2 | 200 | ALT/D200A2 |
Professional quality automotive MEGA fuse. Range from 40 Amp to 500 Amp,
NEW 100 PACKS NOW AVAILABLE
Professional quality automotive MIDI fuse holder
NEW! BULK PACK DISCOUNT PRICES
Inbuilt SOLAR controller Fully supports SMART Euro 5 & Euro 6 engine technology
Lithium battery compatible
Charge a 12v battery from a 12v vehicle supply at up to 30Amp
Ideal solution for charging an auxiliary battery on vehicles equipped with regenerative braking systems.
UK Manufactured Top Quality
16mm2 / #6 AWG cable
Available in PVC Copper & PVC Tinned variants
Available by the metre, 10mtr, 30mtr & 100mtr reels
VOLTAGE SENSING
Very simple to install
3 Connections to make
Power in, Power out & negative...that's it!
Available as a control unit only or as a fully assembled kit
25mm2 Battery cable
Sold by the metre or multiples of
Reel sizes available 10, 30, 100mtrs
"Tinned" also available for marine use
ALT/VSR12-02-049-1EA-107
80 Amp 12volt split charge relay
VOLTAGE SENSING
VOLTAGE SENSING
Very simple to install
Also available as a fully built kit.
Copper tube construction with tin plated outer
Suits cable sizes from 1.5mm2 (#18 AWG) - 4mm2 (#12 AWG).
Stud holes sizes from 4.00mm - 8.00mm
Click image to select size required
30Amp 24 volt - 12 volt ELECTRONIC split charge relay
VOLTAGE SENSING
Very simple to install
THIN WALL 10mm2 / #8 AWG 80/0.40 AUTOMOTIVE CABLE
70.00 AMP 840 WATTS RATED
Various colours available
Copper tube construction with tin plated outer
Suits cable sizes from
6mm2 (#10 AWG) - 50mm2 (#1 AWG).
Stud holes sizes from 5mm - 16mm
Click image to select size required
Copper tube construction with tin plated outer
Our "LARGE" Range covers cable sizes from 70mm2 (#2/0 AWG) - 240mm2 (#500 AWG)
Stud holes sizes from 6mm - 16mm
Click image to select size required
Professional quality automotive MEGA fuse holder.
Bulk deals available for 10, 50, 100, 200 & 400 pieces
100Amp 24 volt split charge relay
VOLTAGE SENSING
Very simple to install
3 Connections to make
Power in, Power out & negative...that's it!
TO CLEAR LIMITED STOCK WAS £59.99 NOW £35.00
Fully assembled wiring harness supplied
NON-Voltage sensing
MIDI fuses range from 30 Amp to 200 Amp
Copper tube construction with tin plated outer
Click image to select size required
Range of sizes to suit 0.5mm2 - 70mm2 cabling
Click ON THE RED BOX to select size
UK Manufactured
35mm2 CSA (Cross sectional area)
(#2.0 AWG)
451/0.30 strands
PVC INSULATED 240.00 AMP CABLE.
Available in RED or BLACK
Tinned cable for MARINE use available
Extremely heavy duty relay unit
Extremely heavy duty relay unit
40mm2 CSA (Cross sectional area)
(#1.5 AWG)
539/0.30 strands
PVC INSULATED 300.00 AMP CABLE.
Available in RED or BLACK
Also available as Tinned cable for MARINE use available in 16mm2, 25mm2, 35mm2, 50mm2, 70mm2 & 95mm2 sizes
