Cart: 0 item (s) - £0.00

Timer relay (fully adjustable) 24 volt ALT/T40405-09

Adjustable 24v 10 Amp switching relay.
Timing mode fully adjustable from 0.5 sec - 6 hours.
Can switch on or off after timing period elapses.
Fantastic product, unlimited uses!
Select your option from the RED BOX below:
£26.90 excluding VAT
£32.28 including VAT
 24 vdc 10 Amp fully adjustable timer relay.

See option list below for timing parameters.

These options are selectable by rotaing the option switch fitted to the relay.
 
Option "0" = 0.5 to 10 Seconds Delay before OFF
Option "1" = 5 to 60 Seconds Delay before OFF
Option "2" = 0.5 to10 Minutes Delay before OFF
Option "3" = 5 to 60 Minutes Delay before OFF
Option "4" = 0.5 to 6 Hours Delay before OFF

Option "5" = 0.5 to 6 Hours Delay before ON
Option "6" = 5 to 60 Minutes Delay before ON
Option "7" = 0.5 to 10 Minutes Delay before ON
Option "8" = 5 to 60 Seconds Delay before ON
Option "9" = 0.5 to 10 Seconds Delay before ON


Examples of unit operations below:-
i.e. DELAY BEFORE OFF >
Option 1, can be set for the relay to be active whilst a feed is present on pin 15, however once the feed is removed from pin 15, the relay will stay active for a period of between 0.5 - 10 seconds, dependent upon the setting used for preset "B".i.e fully anticlockwise = 0.5 sec....fully clockwise = 10 sec, halfway = 5 sec, etc.
Re-energising the trigger on pin 15 will allow the unit to repeat the timimg process.


i.e. DELAY BEFORE ON >
Option 9, can be set for the relay to be "inactive" for a timed period.
Apply a momentary positive feed to pin 15, after the desired delay period has elasped**
 the relay will become active and stay active until the power is removed from pin 30. (** dependent upon the setting used for preset "B".i.e fully anticlockwise = 0.5 sec....fully clockwise = 10 sec, halfway = 5 sec, etc.,)


Will install into a standard 5 pin relay base

Please note this relay will only switch a positive load across the switching contacts.

The "delay off" timing function only starts when the feed is removed from Pin 15,
(i.e a momentary feed is required to pin 15) if the feed is not removed from Pin 15, the unit will operate as a standard relay i.e no timing function.

For the "delay on" timing settings, the trigger applied to pin 15 must be present until the relay energises. The trigger can then be removed, the relay can then only be reset by removing the power from pin 30.


Dimensions:-
Overall height:- 42.50mm
 Overall height:-including terminals 53.23mm
Width:- 30.00mm
Depth:- 30.00mm
Terminals:- 6.28mm width
Terminals :- 12.54mm length


 
Related Products
Timer relay (fully adjustable) 12 volt        <br>ALT/T40205-09<br><BR>
£25.90
£31.08 (inc. VAT)
Adjustable 12v 10 Amp switching relay.
Timing mode fully adjustable from 0.5 sec - 6hours.
Can switch on or off after timing period elapses.
Fantastic product, unlimited uses!
Timer Relays (Fixed duration) 12v & 24v Variants
£27.49
£32.99 (inc. VAT)
A comprehensive range of 14 variations of fixed duration timer relays
Available in both 12v & 24v variants
DURITE Timer Relays (Fixed "programmed to order" duration) 12v & 24v Variants
£40.29
£48.35 (inc. VAT)
A comprehensive range of DURITE fixed duration timer relays
Available in both 12v & 24v variants
Guaranteed Next Working Day Delivery Service Available
Please contact us for full details