Cart: 0 item (s) - £0.00
Categories
Suitable for 12v vehicles only.
Flip up lids for easy access to the terminal blocks
The relay will provide two switched circuit outputs, (each 15 Amp rating), to be used conventionally, i.e. one for auxillary battery charging and the other to run a 12vdc fridge.
In addition a non- switched 12v feed is also provided to connect to Pin 4 of the 12S socket.
The idea of a voltage controlled relay is to simplify the installation, no connection is made to the vehicles alternator .
Simply connect this relay directly to the towing vehicles positive battery terminal and link to the appropriate pins in the grey 12S socket, thats it!
The relay monitors the towing vehicles battery voltage and when it reaches a pre set level, the relay switches on and supplies charging current to the aux. battery.
Only 6 connections are required to the unit and as such it can be fitted in next to no time .
Supplied with detailed full colour instructions. (No cable is supplied with the unit).
Also available as a kit with pre-assembled wiring harness
Related Products
From: £27.95
£33.54 (inc. VAT)
ALTEC 140Amp 12 volt split charge relay
VOLTAGE SENSING
Very simple to install
Also available as a fully built kit.
VOLTAGE SENSING
Very simple to install
Also available as a fully built kit.
From: £38.78
£46.54 (inc. VAT)
DURITE 140Amp 12 volt split charge relay
VOLTAGE SENSING
Very simple to install
VOLTAGE SENSING
Very simple to install
From: £39.15
£46.98 (inc. VAT)
DURITE 140Amp 24 volt split charge relay
VOLTAGE SENSING
Very simple to install
VOLTAGE SENSING
Very simple to install
£14.95
£17.94 (inc. VAT)
Pre-wired twin sockets 7 pin 12N & 12S sockets.
£5.41
£6.49 (inc. VAT)
7 Pin 12N Plastic trailer pre-wired electrical socket.
£2.12
£2.54 (inc. VAT)
Towing socket (double) mounting plate
Suitable for left or right hand mounting
Suitable for left or right hand mounting
£1.58
£1.90 (inc. VAT)
Towing socket (single) mounting plate
Suitable for left or right hand mounting
Suitable for left or right hand mounting
£2.66
£3.19 (inc. VAT)
Towing socket (single) mounting plate (Retro fitting model)
No requirement to disconnect the wiring to change the mounting plate
Suitable for left or right hand mounting
No requirement to disconnect the wiring to change the mounting plate
Suitable for left or right hand mounting
£0.99
£1.19 (inc. VAT)
Rubber gasket for 7 or 13 pin electrical towing socket
£2.66
£3.19 (inc. VAT)
7 Pin 12 volt towing plug
12N
Metal bodied
Brass screw terminals
12N
Metal bodied
Brass screw terminals
£3.96
£4.75 (inc. VAT)
7 Pin 12 volt towing socket
12N
Metal bodied
Brass screw terminals
12N
Metal bodied
Brass screw terminals
£4.98
£5.98 (inc. VAT)
13 Pin Electrical towing connector
Plastic bodied
Brass screw terminals
£5.84
£7.01 (inc. VAT)
13 Pin 12N Electrical towing socket
Plastic bodied
Brass screw terminals
Plastic bodied
Brass screw terminals
£6.24
£7.49 (inc. VAT)
13 Pin 12N Electrical towing socket
Inbuilt fog lamp cutout
Plastic bodied
Brass screw terminals
Inbuilt fog lamp cutout
Plastic bodied
Brass screw terminals
£6.18
£7.42 (inc. VAT)
7 Pin 24 VOLT Electrical towing connector
24N
Metal bodied
Brass screw terminals
24N
Metal bodied
Brass screw terminals
£7.50
£9.00 (inc. VAT)
7 Pin 24 VOLT Electrical towing socket
24N
Metal bodied
Brass screw terminals
24N
Metal bodied
Brass screw terminals
£7.50
£9.00 (inc. VAT)
7 Pin 24 VOLT Electrical towing socket
24S
Metal bodied
Brass screw terminals
24S
Metal bodied
Brass screw terminals
£1.99
£2.39 (inc. VAT)
7 Pin 12N Electrical towing connector
Plastic bodied
Brass screw terminals
£3.16
£3.79 (inc. VAT)
Converts a 13 pin towing socket to accept a 7 Pin 12N Electrical towing socket
No wiring required, simply plug in and play
No wiring required, simply plug in and play
£3.16
£3.79 (inc. VAT)
Converts a 7 pin 12N towing socket to accept a 13 Pin 12N Electrical towing socket
No wiring required, simply plug in and play
No wiring required, simply plug in and play
£59.99
£71.99 (inc. VAT)
100Amp 24 volt split charge relay
VOLTAGE SENSING
Very simple to install
3 Connections to make
Power in, Power out & negative...that's it!
VOLTAGE SENSING
Very simple to install
3 Connections to make
Power in, Power out & negative...that's it!
£29.12
£34.94 (inc. VAT)
Easy installation
Fully assembled wiring harness supplied
NON-Voltage sensing 12volt system
Fully assembled wiring harness supplied
NON-Voltage sensing
£1.99
£2.39 (inc. VAT)
7 Pin 12S Electrical towing connector plug
Plastic bodied
Brass screw terminals
£2.45
£2.94 (inc. VAT)
7 pin 12S towing electrical socket
£19.95
£23.94 (inc. VAT)
Easy installation
Safe Reliable Proven System Suitable for Caravans, trailers, motorhomes etc
Fully assembled wiring harness supplied
12 volt 30Amp Voltage sensing system
ALT/TF1170-3 KIT
Safe Reliable Proven System Suitable for Caravans, trailers, motorhomes etc
Fully assembled wiring harness supplied
12 volt 30Amp Voltage sensing system
ALT/TF1170-3 KIT
£2.45
£2.94 (inc. VAT)
7 pin 12N towing electrical socket
From: £16.62
£19.94 (inc. VAT)
Easy installation
Fully assembled wiring harness supplied
NON-Voltage sensing
Fully assembled wiring harness supplied
NON-Voltage sensing
£11.17
£13.40 (inc. VAT)
Voltage Sensitive 30 Amp fridge and auxiliary battery split-charge relay for caravan/motorhome or trailer.
£3.95
£4.74 (inc. VAT)
Connects the 240 volt caravan electrical system to a household 13 amp socket, via standard caravan / site hookup mains lead.
Connect this adaptor to your existing site mains lead, and connect to your caravan.
•Enables connection of the caravan to household mains supply
•Ideal for pre-cooling fridge or charging leisure battery before setting off.
Connect this adaptor to your existing site mains lead, and connect to your caravan.
•Enables connection of the caravan to household mains supply
•Ideal for pre-cooling fridge or charging leisure battery before setting off.
From: £30.75
£36.90 (inc. VAT)
STERLING POWER PRO-SPLIT D Low Volt Drop Split Charge
10 models available
One alternator input & up to 3 outputs
Amperages from 70A - 200A
10 models available
One alternator input & up to 3 outputs
Amperages from 70A - 200A
£1.73
£2.08 (inc. VAT)
A range of 7 core cables with varying inner core cable sizes, buy by the metre or by the roll.
From: £6.66
£7.99 (inc. VAT)
A range of 13 core cable
£2.75
£3.30 (inc. VAT)
" ADD A CIRCUIT" MICRO fuse blade size, add a circuit fuse holders ALT/FH600
£2.75
£3.30 (inc. VAT)
" ADD A CIRCUIT" Mini fuse blade size, add a circuit fuse holders ALT/FH597
£2.95
£3.54 (inc. VAT)
" ADD A CIRCUIT" Micro2 fuse blade size, add a circuit fuse holders
£2.35
£2.82 (inc. VAT)
" ADD A CIRCUIT" Standard fuse blade size, add a circuit fuse holders ALT/FH450-02
